LS9 Specifications

LS9 Features  • Specifications  •  Accessories • Dimensions • Panel Views • Brochure

 

General Specifications Sampling Frequency Internal: 44.1kHz, 48kHz External: 39.69 - 50.88kHz Fader 100mm motorized x33 <LS9-32> , x17 <LS9-16> LCD Display 320 x 240 dots Graphic Color LCD Phantom Power 48V Dimensions (W x H x D mm) LS9-32: 884 x 220 x 500 LS9-16: 480 x 220 x 500 Net Weight LS9-32: 19.4kg LS9-16: 12kg Power Requirements LS9-32: 170 W, 110-240 V, 50/60 Hz LS9-16: 95 W, 110-240 V, 50/60 Hz Temperature Range Operation free-air +10°C to +35°C Storage Temperature Range -20°C to +60°C   Analog Input Characteristics Input Terminals GAIN Actual Load Impedance For Use With Nominal Input Level Connector Sensitivity *1 Nominal Max. before clip INPUT 1-16 <LS9-16> INPUT 1-32 <LS9-32> -62dB +10dB 3kΩ 50-600Ω Mics & 600Ω Lines -82dBu (61.6µV) -62dBu (0.616mV) -42dBu (6.16mV) XLR-3-31 type with latch(Balanced) -10dBu (245mV) +10dBu (2.45V) +30dBu (24.5V) *1. Sensitivity is the lowest level that will produce an output of +4dBu(1.23V) or the nominal output level when the unit is set to maximum gain. (all faders and level controls are maximum position.) *2. In these specifications, 0dBu = 0.775 Vrms. *3. All input AD converters are 24bit linear, 128times oversampling. *4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.   Analog Output Characteristics Output Terminals Actual Source Imp. For Use With Nominal GAIN SW *5 Output Level Connector Nominal Max. before clip OMNI OUT 1-8 <LS9-16> OMNI OUT 1-16 <LS9-32> 75Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.3 V) XLR-3-32 Type (Balanced) *1 +18dB -2dBu (616mV) +18dBu (6.16V) PHONES OUT 15Ω 8Ω Phones – 75mW 150mW Stereo Phone Jack (TRS) (Unbalanced) *2 40Ω Phones – 65mW 150mW *1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD ) *2. PHONES stereo phone jack is unbalanced.( Tip=LEFT, Ring=RIGHT, Sleeve=GND ) *3. In these specifications, 0dBu = 0.775 Vrms. *4. All output DA converters are 24bit, 128times oversampling. *5. There are switches inside the body to preset the maximum output level.   Digital Input Characteristics Terminal Format Data Length Level Connector 2TR IN DIGITAL COAXIAL IEC-60958 24bit 0.5Vpp/75Ω RCA Pin Jack   Digital Output Characteristics Terminal Format Data Length Level Connector 2TR OUT DIGITAL COAXIAL IEC-60958 Consumer Use 24bit 0.5Vpp/75Ω RCA Pin Jack